Type Extend woofer
Frequency Response(Preset) 30Hz-200Hz
Amplifier Recommend VDA18 / C18 / C15
Preset [V25_100/C] [V25_125/C]
Horizontal 360°
Angle Increments 0° 1° 2° 3°
Drivers LF:2×15" 100mm Voice Neodymium
Handling Power (RMS) LF:1200W
Maximum Peak SPL 142dB/1m
Nominal Impedance LF:4Ω
Connections 2 x NL4 SpeakOn
Pin Connections NL4=LF:+1-1
Heigh Front 445mm
Heigh Back 445mm
Width 1200mm
Depth 550mm
Weight 72kg / 158.7lbs
Rigging and Handling
Handle 6 ergonomic handles
Antiskid 2 ground runners
Fastener 4 side fastener
Physical Data
Material Baltic Birch Plywood
Finish Dark grey
Front Polyester powder-coated steel grill
Rigging Steel
Protection rating IP55
V15/V12/V25 Bump-Bar Suitable for V15/V12/V25 enclosures, with extend Bar
Laser+Receiver Adopting high-precision digital sensor+20mw point far-field fixed focus coaxial laser
V15/V12/V25-DELTA Allows for horizontal aiming using two motors on the back or front of the array.
V15/V12/V25 Bump-Bar Flight Case Accommodate 2 Bump / 2 Bar, and hanging equipment accessories
U-shaped shackle 3.25t 5/8 U-shaped shackles connect to Bump-Bar
Spanset 2T/2m spanset used for connect shackles, used for front and rear
V25-Trolley The trolley can accommodate 4 stacked V25 enclosures, combined with a hanging rigging system
V25-Cover Cover for 4x V25 enclosures stacked on V25 Trolley
V15/V12/V25 Rigging-Cover 1、8-12 V25(6m)length 2、14-18 V25(8.5m)length
VDA18-Rack 9U rack mounted with 3 VDA18 amplifiers, Qanon Audio V-panel Signal panel and V-PowerII distribution
C18-Rack 9U rack mounted with 3 C18 amplifiers、1 DF36 Audio Processor, Qanon Audio DS3 Three-Phase Power distribution
2-Pin 2*4㎡ NL4 Speaker Cables 1、2Pin-NL4-15(15meter) 2、2Pin-NL4-25(25meter)
8-Pin 8*4㎡ PA-COM Speaker Cables 1、PA-COM-0.7(0.7meter) 2、PA-COM-10(10meter) 3、PA-COM-15(15meter) 4、PA-COM-25(25meter)
8-Pin PA-COM Male without locking to 4ch NL4(ch1、ch2、ch3、ch4)Wiring:+1-1 5meter / 4ch
V25_SYSTEM_CAD_FILES Download
V25 Data_PI_2.0_EN Download
V12_sps_Data_EN Download