Type Subwoofer
Frequency Response(Preset) 23Hz-200Hz
Amplifier Recommend VDA18 / C18 / C15
Preset [VS221_60/C] [VS221_80/C]
Horizontal 360°
Drivers LF:2×21" 115mm voice coil Neodymium
Handling Power (RMS) LF:1600W
Maximum Peak SPL 145dB/1m
Nominal Impedance LF:4Ω
Connections 2 x NL4 SpeakOn
Pin Connections NL4=LF:+1-1
Heigh Front 600mm
Heigh Back 600mm
Width 1200mm
Depth 800mm
Weight 99kg / 218lbs
Rigging and Handling
Handle 4 ergonomic handles
Antiskid 2 ground runners
Fastener 2 side fastener
Physical Data
Material Baltic Birch Plywood
Finish Dark grey
Front Polyester powder-coated steel grill
Rigging Aluminum
Protection rating IP55
VS28/VS221-Bump Suitable for VS28/VS221 enclosures, with extend Bar,Max 16 VS28 / 12 VS221
U-shaped shackle 3.25t 5/8 U-shaped shackles connect to Bump-Bar
Spanset 2T/2m spanset used for connect shackles, used for front and rear
VS28/VS221-Trolley The trolley can accommodate 4 stacked VS28/VS221 enclosures, combined with a hanging rigging system
2 VS221-Cover Cover for 2x VS221 enclosures stacked on VS221 Trolley
3 VS221-Cover Cover for 3x VS221 enclosures stacked on VS221 Trolley
4 VS221-Cover Cover for 4x VS221 enclosures stacked on VS221 Trolley
VS28 Touring Flight Case Accommodate 1 VS221 Dimensions(W x H x D):1260 x 805 x 850mm
VS28/VS221 Rigging-Cover 8 VS28/VS221(4.8m)length
VDA18-Rack 8 VS28/VS221(4.8m)length
VDA18-Rack1 3U rack mounted with 1 VDA18 amplifiers, and 1 SCN Signal panel
C18-Rack 3U rack mounted with 1 VDA18 amplifiers, and 1 SCN Signal panel
2-Pin 2*4㎡ NL4 Speaker Cables 1、2Pin-NL4-15(15meter) 2、2Pin-NL4-25(25meter)
8-Pin 8*4㎡ PA-COM Speaker Cables 1、PA-COM-0.7(0.7meter) 2、PA-COM-10(10meter) 3、PA-COM-15(15meter) 4、PA-COM-25(25meter)
8-Pin PA-COM Male without locking to 4ch NL4(ch1、ch2、ch3、ch4)Wiring:+1-1 5meter / 4ch
VS221_SYSTEM_CAD_FILES Download
VS221 Data_PI_EN Download
VS221 SPS_PI_2.0_EN Download